Pay attention to the surface you are walking on and.
How to walk on asphalt shingle roof.
As with cupped shingles stay off in cold weather.
Keep gutters clean to ensure roofs remain as dry as possible.
As long as the plywood under the shingle roof is in good condition this way can provide many benefits.
Inspect the shingles from the roof edge from upper building windows or if the roof must be walked on step carefully on the flat portions of the shingle on tiptoe avoiding stepping on the raised curled edges of the shingles as otherwise you ll break off the edges.
For metal and asphalt shingle roofs you can get the best grip by wearing flat rubberized outsoles.
Upon walking on these shingles shoe tread tears away these granules.
If the shingles are also brittle even in warm weather do not walk on the roof.
Inspect your roof visually before attempting to walk on it.
It is a good idea though to walk on the lower parts of those panels.
Whether if you need footwear for asphalt metal or cedar roofing traction is the most important thing to consider in a shoe.
The room temperature shingle has a reasonable flexibility but you can go too far and fracture the fibre even though you may not snap it off permanently weakening it.
If you have another type of roof it s important to check with your manufacturer to find out how to clean your roof.
Use a sturdy extension ladder that extends at least 3 feet above the eaves to climb onto the roof and secure the bottom to the foundation and the top to the eaves or fascia so it doesn t move.
3 install 1x4 purlins down over the shingles before installing the metal roof the third way to install a metal roof over shingles is by applying 1x4 purlins over the shingle roof.
If you must lift a corner do it ever so gently as while it is cold it can simply snap off.
For cedar roofs link to our article you need shoes with spikes.
There is no need to walk on the roof unless it is for the rare and occasional repair.
This is by far the most common way to install a metal roof.
This shortens the roof s lifespan and degrades the shingles.
When it comes to metal shingles it is recommended to walk on the upper half of the shingle panel where there is minimal airspace between the metal.
Now that you know the best ways to clean a roof be sure to follow these guidelines carefully.
Use small controlled steps when walking on the shingle roof.
Dot the cement under and around the edge of the last ridge shingle where you removed the nail line.
If you think you may have areas that could get repeated foot traffic you will want to consider installing foam backers on those shingles.
Apply a heavy bead of asphalt cement.
Corrugated panels are also safe to walk on as those are screwed right onto the roof decking.
Nail at the four corners to the end of the ridge and always add a little dab of tar to cover the nail heads.
If you see any splits or areas that appear to be damaged avoid walking on.
